Williams Grove Speedway Forums

Welcome to Williams Grove Speedway Forums
It is currently Sun Oct 26, 2014 5:32 am

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Tue Apr 22, 2008 8:29 pm 
Offline
Pit Member
Pit Member

Joined: Tue Mar 07, 2006 11:21 pm
Posts: 531
Does anyone know of a Small block one piece pan gasket without the dipstick provision? My oil pan has no kick outs for the dip stick and the block has the kickout milled off..I really don't want to make a silicone mess out of this..Thanks part numbers would be appreciated. :bananadance:


Top
 Profile  
 
PostPosted: Wed Apr 23, 2008 12:05 am 
:offtopic: ;)


Top
  
 
PostPosted: Wed Apr 23, 2008 2:30 am 
Offline
Legend
Legend
User avatar

Joined: Thu Feb 02, 2006 3:04 am
Posts: 6358
Location: DOVER
Use the one piece silicone rubber gasket from Moroso. They are great gskts. the bolt holes have a metal insert so you don't crush the gasket out and it has a dip stick provision that is closed off on the inside so you can leave the excess hang, can't believe I said that, or cut it off with no leak. A little expensive but believe me after you use one you won't use another pan gskt.


Top
 Profile  
 
PostPosted: Wed Apr 23, 2008 1:14 pm 
Offline
Pit Member
Pit Member
User avatar

Joined: Sun Feb 05, 2006 1:26 am
Posts: 711
Location: Martinsburg, WV
GOSHOW wrote:
Use the one piece silicone rubber gasket from Moroso. They are great gskts. the bolt holes have a metal insert so you don't crush the gasket out and it has a dip stick provision that is closed off on the inside so you can leave the excess hang, can't believe I said that, or cut it off with no leak. A little expensive but believe me after you use one you won't use another pan gskt.


Fel-Pro has the same type of gasket too. Silicone with the "crush sleeves". I'll never use another cork gasket unless it's my only option.

_________________
2014 Race Counter
Hagerstown - 15
Winchester - 12 and done for 2014
Path Valley - 2 and done for 2014
Williams Grove - 5
Maple Grove - 1 and done for 2014

https://www.facebook.com/brettroseracingengines
Finish Line columnist for The Journal-News Martinsburg,WV


Top
 Profile  
 
PostPosted: Thu Apr 24, 2008 1:34 am 
Offline
Legend
Legend
User avatar

Joined: Thu Feb 02, 2006 3:04 am
Posts: 6358
Location: DOVER
Sorry my bad RacerRose is correct with the Fel-Pro pan gskt. Moroso makes the valve cover gskt's I use.
By the way cork is for plugging a wine bottle.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group