Aaron Ott?

SLINKMASTERC · **Joined:** Mon Aug 25, 2008 3:57 pm **Posts:** 3261

Maropowered383 wrote:

Its deffinetly a Ford motor with evenly spaced exhaust ports and the distributor on the front!

Well I just found this in the hoseheads link.

Quote:

Newer Generation chevrolets do have the mag/distributor in the front FYI... I thought I read on his FB page, that it was a newer Gen III or IV motor

ChasinRacin · **Posted:** Wed Jun 06, 2012 9:38 pm

Maybe it's is big block chevy,, :cwm4:

Sea Bass · **Posted:** Wed Jun 06, 2012 10:12 pm

Brent Leach wrote:

Stew wrote:

:laughing7: Fords have their exhaust ports evenly spaced apart

So do some Chevy's.

Stew · **Posted:** Wed Jun 06, 2012 10:35 pm

I was gona say , i heard AO tweeted last Saturday about running a 360

I did not want to sound like a know it all

sprintwrench46 · **Posted:** Wed Jun 06, 2012 11:06 pm

It was a reworked Yates Ford motor. That came from a worker at Ott. Look for them to run it a lot more.

kitchen king · **Posted:** Thu Jun 07, 2012 12:03 am

Here is the photo....

Now what is it?

hotrodney · **Posted:** Thu Jun 07, 2012 1:53 am

Brent Leach wrote:

Stew wrote:

:laughing7: Fords have their exhaust ports evenly spaced apart

So do some Chevy's.

Only big blocks as far as I know.

hotrodney · **Posted:** Thu Jun 07, 2012 1:54 am

sprintwrench46 wrote:

It was a reworked Yates Ford motor. That came from a worker at Ott. Look for them to run it a lot more.

Is it a 360 or 410?

Brent Leach · **Joined:** Thu Feb 02, 2006 1:59 am **Posts:** 8880

I'm not saying this is what he was running . I'm just saying Chevrolet DOES make a small block with the exhaust ports evenly spaced. I remember ZEMCO used one back when Jeff Shepard drove for them. It's an expensive switch because when you build one , everything is different. Cam , headers , heads , injectors, etc..

I am Reality · **Joined:** Thu Feb 02, 2006 10:23 am **Posts:** 164

That chevy is an LS. However there are splayed valve heads for non LS motors. That is what Zemco would have had if they had one when Shepard ran it. Postupack had one when mark smith drove for him too. Illegal now I believe.

HotRodBob · **Posted:** Thu Jun 07, 2012 8:35 am

Yes, it is a FORD, with some NASCAR engine components being utilized, as someone mentioned above. This is info straight from the source. :silenced:

Stew · **Posted:** Thu Jun 07, 2012 9:50 am

Brent Leach wrote:

Stew wrote:

Fords have their exhaust ports evenly spaced apart

So do some Chevy's.

Correct

1080 · **Posted:** Thu Jun 07, 2012 9:55 am

Yes on the Mark Smith 22M....it had evenly spaced exhaust ports and was a 410 Chevy. Looked like a big block or a Ford from a distance.

T-440 · **Joined:** Thu Feb 02, 2006 8:46 pm **Posts:** 414

Benny Gorden has put his Nascar Truck Series engine in his dirt late model from time to time up here. Mike Blose won the Chili 100 with it one year. That thing just screams!

slickracer · **Joined:** Sat Jul 11, 2009 10:29 am **Posts:** 252

Swandogg wrote:

Not sure on the cubes, but the lack of down nozzle injectors on a Ford doesn't necessarily mean it's a 360. I think the port spacing makes it difficult to place them in a Ford head. :dontknow:

By the way, Mopar motors feature a rear mount mag, and headers and port arrangement like a small block Chevy...but look closely, and you'll see they have 10 bolts per head, like a Ford. Also, the block is a Y-block design, as opposed to the V-block of the other two. :whistle:

Bob Fetter used to have Fords with down nozzles.

Williams Grove Speedway Forums

Aaron Ott?

Who is online